Rheem Ruud Weatherking Factory OEM Protech Parts 62-22868-93 Furnace Hot Surface Ignitor
Rheem Ruud Weatherking Factory OEM Protech Parts 62-22868-93 Furnace Hot Surface Ignitor
Manufacturer : Protech
Amazon Price : $15.80
buy from
Avg. Customer Rating:5 of 5.0
Availability: Usually ships in 24 hours Ships from and sold by North America HVAC
Product Description
This silicon carbide hot surface ignitor replaces most applications on Rheem, Ruud, and Weatherking furnaces. This part is a direct replacement. It will fit exactly and requires no adapters or wiring changes. This part WILL NOT fit the -GEC and -GED "Drum" furnace models. This parts replaces part numbers 62-22441-01, 62-22548-01, 62-22868-01, 62-22868-02, 62-22868-82, 62-22868-92, 62-22868-93S, 62-22869-01, 62-23460-01, and 8553-5514. These ignitors are extremely fragile and should be handled with care.
Product Details
  • Amazon Sales Rank: #127153 in Home Improvement
  • Color: Multicolored
  • Brand: Protech
  • Model: 62-22868-93
  • Product Features
  • R-62-22868-93 Hot Surface Ignitor
  • Exact Fit with No Adapters or Wiring Changes Required
  • Direct Replacement Part For Most Rheem, Ruud, & Weatherking Furnaces With Hot Surface Ignitors
  • Will Not Fit -GEC or -GED "Drum" Type Furnaces
  • Customer Reviews

    Most helpful customer reviews

    7 of 7 people found the following review helpful.
    5Glad this part was as easy to find as it was on Amazon!
    By Bill S
    I had issues with my furnace did a few minutes of research on line and tracked this part to Amazon. I waited to get the new part in hand before I was going to pull the old one out of the unit that would not produce any heat. As soon as I removed the old one, I knew that it was the problem. The element was in fact broken and would not allow the circuit to be completed. 5 minute repair after I opened the package. Just a note....... Use rubber gloves when handling! Oils from your skin will produce a hotspot. On top of all of this.... Rapid shipment and the price being inexpensive was awesome!

    7 of 7 people found the following review helpful.
    5Hot Surface Ignitor 62-22868-93
    By CRC
    This is the exact replacement ignitor for my Rheem Criterion II gas furnace. Original ignitor lasted 13 years. Took me less than 10 minutes to install.

    4 of 4 people found the following review helpful.
    5Rate and review
    By Joe Pham
    Seller shipped the item fast. The unit works excellent. Be sure the right Model of the IGNITER unit so that the connector type is right (male or female) or you have to switch the connector from your old one to the new item. It still works this way but you must be sure to make good + safe connections. The IGNITER is a RESISTOR. It burns itself red to ignite the flame. Do not let the heat melts / shorts the wire at the new connections. And be sure that the unit is OFF when the flame has been ignited. To know about the mafunctioning of the igniter? If the system is on, the fan is on, the gas is "smell-able" but nothing happens, the IGNITER has been dead ! Order a new one. It takes 2 minutes to replace / install the item.

    See all 195 customer reviews...
    Customers who shopped this item also shopped
    New Strait-Line
    Get easy, fast, and accurate results with the latest laser levels, stud finders, and distance estimators from Strait-Line.