Powered by a 13 amp motor, this 10-inch compound miter saw cuts 4-by-4 and 2-by-6 lumber easily at 90 degrees. The table pivots up to 47 degrees left and right and has positive stops at 0, 22-1/2, and 45 degrees for quick and accurate angle setting. The blade tilts from -3 to 48 degrees for a variety of bevel cutting operations. The compound action allows easier cutting of crown moldings because the table and blade can be set at the proper angle to keep the molding flat on the table. By tilting the blade, bevels can be cut on materials up to 5-7/8 inches wide. The aluminum base has a built-in carrying handle in the rear to prevent excess wear and tear on the operating handle. The base is 3-1/2 inches high--the same height as a 2-by-4 placed on edge-so a job site work table can be built easily when support is needed for longer workpieces. The fence is pre-drilled for easy mounting of wooden auxiliary fences to support taller workpieces. A dust bag is also included for dust collection. WHAT'S IN THE BOX
Delta ShopMaster Model MS250 10" Compound Power Miter Saw with a 13 amp., 120V motor; 8' cord with grounded plug, electric blade brake, 10" diameter 40T carbide-tipped blade, retractable blade guard, dust bag, blade wrench and instruction manual.
DELTA DIFFERENCE
- Powerful 13 amp. motor provides plenty of power for tough cutting jobs.
- Cross cuts a nominal 2" X 6" or 4" X 4" at 90°. Miters a 2" X 4" flat or on edge et 45° R & L
- Lightweight, aluminum-alloy construction weighs only 28 lbs.
- Large, one-piece fence for maximum support of extra-wide materials.
- Easy-to-read bevel scale with adjustable positive stops for quick tilt settings.
- Convenient miter indexing mechanism for quick, easy miter settings.
- Electric blade brake automatically stops blade in seconds.
- Lubricated-for-life ball bearings assure trouble-free performance with less maintenance
- Dust bag collects fine dust and woodchips.
- Makes quick work of cutting compound angles on crown moulding or nominal 2 X 4's.
SPECIFICATIONS
Motor: 13 amp
Key Feature: Bevel Ability
Blade:
Diameter: 10"(254 mm)
Arbor: 5/8"
Speed: 5200 rpm
Capacity:
90° Crosscut: 5 3/4"W X 2 3/8"H (146 X 94 mm) 3 3/8"W X 3 11/16"H (86 X 94 mm)
Miter at 45° Right & Left: 4 1/8"W X 2 3/8"H (105 X 60 mm) 2 5/8"W X 3 5/8"H (67 X 92 mm)
Bevel 45° L (90° miter): 5 7/8"W X 1 9/16"H (149 X 40 mmm) 3 5/8"W X 2 9/16"H (92 X 65 mm)
Compound 45° X 45°: 4 1/8"W X 1 9/16"H (105 X 40 mm mm) 2 7/16"W X 2 7/8"H (62 X 73 mm)
Fence Size Right & Left: 17 5/8"W X 2 1/2"H (448 X 63mm)
Table:
Diameter: 11 1/2"(279 mm)
Sides: 3" R & L (76 mm)
Miter Stops: 0°, 22 1/2°, 31.62°, and 45° R & L
Miter Range: 47° R & L
Bevel Stops: 0°, 45° Adjustable
Bevel Range: -3°/+48°
Overall Dimensions:
Height: 20 1/2"(521 mm)
Width: 17 3/4"(435 mm)
Depth: 23 1/2"(600 mm)
Weight: 28 lbs. (13 kg)
WARRANTY
Two-year limited warranty on machines, parts, and accessories.
