Most helpful customer reviews
10 of 10 people found the following review helpful.
The listed specs say it has a 5. 5mm ...
The listed specs say it has a 5.5mm x 2.5mm DC plug. It is actually a 5.5mm x 2.1mm plug.
6 of 6 people found the following review helpful.
Solid 90+ Watt Supply
Received quickly from the seller and tested it with a 6 ohm load (three - 2 ohm 50 watt resistors in series). The output voltage held steady at about 24.4 Volts DC and did not drop under the load. I used a Fluke 179 meter in series and measured the current to be 3.9 Amps DC. I let the load sit for about 30 seconds and the supply voltage continued to remain the same but the load resistors got very hot so I could not leave it any longer. A solid supply for 95 watts.
I found the N style barrel connector from RadioShack worked great with the default connector on the supply cable.
5 of 5 people found the following review helpful. See all 68 customer reviews...
Good for long 24V LED strip lights
By Dr H
Good solid power supply. Works great for LED strip lights which require 24-volts. NB: Make *sure* that your lights are 24V lights, and not -12V- lights. This supply will overload 12V lights, but is perfect for -24V- lights.