FEATURES

• Zinc-plated steel tension rollers mount next to the drum to eliminate slippage
• Drum height and downward pressure are adjustable to eliminate snipe
• 1/16-inch-per-turn height adjustment for precision accuracy
• Thrust bearing height adjustment for easy adjustments
• Large, easy-to-use cast iron height adjustment handwheel allows both radical height changes and minute adjustments for extremely precise sanding thickness control

SPECIFICATIONS

• Minimal assembly required
• Minimum of 400 CFM dust collection recommended
• Patented abrasive take-up fasteners for quick abrasive changes
• Convenient on/off switch with overload protection mounted at front of machine base
• Drum operates at 1,700 RPM
• Drum ball bearings are sealed and permanently lubricated
• 20 Amp service required
• Max. Sanding Width (in): 44 (Two passes)
• Min. Length (in): 2-1/4
• Max. Thickness (in): 4
• Min. Thickness (in): 1/32
• Drum Dimensions (dia. x L/in.): 5 x 22
• Drum Speed (RPM): 1,700
• Dust Port Dia. (in): 4
• Conveyor Motor: 43 in.-lbs. Torque,
• Direct Drive, DC
• Conveyor Variable Feed Rate (FPM): 0 to 10
• Motor (TEFC): 1-3/4HP, 1PH, 115V
• Net Wt. Bench top only (lbs.): 282