|
|
|
DEWALT D25203K 1" 3-Mode D-Handle SDS Hammer |
 |
DEWALT D25203K 1" 3-Mode D-Handle SDS Hammer
Manufacturer : DeWalt
List Price : $410.00
Amazon Price :$199.94
 |
|
Amazon.com
DeWalt's D25203K is the tool you need to make holes 3/16- to 7/8-inch in concrete. It's powered by a heavy-duty, variable speed 7.5 amp motor with dust-sealed ball bearings for long life. For super versatility, it switches easily between three modes of operation: hammer drill, drill only, and hammer only. Set it to hammer, and you're ready to chip off materials like splattered mortar. Switch to drill, and you're set to drive bits and fasteners. It's packing 2.3 foot/pounds of impact energy, but the rubber molded handle makes a tough job more comfortable. Need to back out a fastener? Just switch to reverse mode. Should a bit jam, you're covered by the factory-set clutch that's ready to reduce any sudden, high-torque reaction. The side handle can be positioned anywhere on its 360-degree rotation, a great plus for left-handers as well as awkward workspaces. Because there's no battery to lug around, it's only 6 pounds, so it's easy on the user and feels good in the hand.--Kris Jensen-Van Heste
|
|
| Customers who shopped this item also shopped |
 |
|
|
 |
DEWALT DW5470 5-Piece Rock Carbide SDS Plus Hammer Bit Set - DeWalt
Amazon Price :$26.14
|
 |
DEWALT DW5349 10" SDS Plus Scaling Chisel Bit - DeWalt
Amazon Price :$16.94
|
 |
DEWALT DW5348 10" SDS Plus Bull Point Bit - DeWalt
Amazon Price :$12.74
|
 |
DEWALT DW5439 1/2" x 10" x 12" Rock Carbide SDS Plus Hammer Bit - DeWalt
Amazon Price :$12.94
|
 |
DEWALT DW5417 1/4" x 4" x 6" ROCK CARBIDE SDS Plus Hammer Bit - DeWalt
Amazon Price :$5.74
|
|
|
