With an all ball-bearing 3/4 horsepower induction motor and its electronic variable speed range of 450-2,600 rpm, this lathe is the right choice for beginners and experienced woodworkers. It has the capacity to turn spindles up to 40 inches long and for faceplate turning, the swing over the tool rest base is 10-1/8 inches and swing over the bed is 14 inches. The headstock pivots for outboard turning and can be positioned anywhere along the bed. Cast-iron construction and a ribbed design give the lathe bed its strength while reducing vibration. The hollow tailstock ram travels 3 inches and allows the use of a hollow cup center and long boring bits for drilling into work pieces such as lamp bases. With the unit stopped, the 24 separate lockable divisions on the spindle and detents on the headstock make it easy to sand flats or make precise calculations without the need to remove the work piece from the lathe. Easy to use controls like multi-position locking levers and an oversized tool rest locking handle make for convenient adjustments, while the on/off switch is located high above the motor assembly for quick and easy access. The included stand has a wide footprint designed for maximum stability. If a change in spindles is necessary the standard 1-8 right-hand thread allows the use of any standard threaded spindles. WHAT'S IN THE BOX
Delta Industrial Model 46-715 14" Cast-Iron Lathe includes a 3/4HP, 60 Hz., 9.8 amp motor; 12" cast-iron offset tool rest, 6" face plate with spur center and 1" - 8 spindle, steel stand and instruction manual.
DELTA DIFFERENCE
- Powerful 3/4HP, 60 Hz., 9.8 amp, easy speed change.
- Turn head stock 45 degrees, 90 degrees, and 180 degrees for bowl turning.
- Easy access on/off switch.
- 6" face plate, spur center and ball-bearing live center included.
- 12" cast-iron offset tool rest.
- Tailstock ram travel 3" through 3/4 thread.
- Steel stand included.
- 24-position index for ornamental work.
SPECIFICATIONS
MOTOR: 3/4 HP
SPINDLE SPEEDS: 500-2500 RPM
CAPACITIES:
Swing over bed: 14"(356 mm)
Swing over base: 10 1/8"(257 mm)
Distance between centers: 40"(1016 mm)
Drive Spindle: 1" -8 RH thread
Drive spindle through hole: 7/16"(11 mm)
Head and Tailstock Taper: #2 Morse
Tailstock through Hole: 3/8"(9 mm)
Tailstock Ram Travel: 3"(76 mm)
Heat Index Lock: 24 Divisions
OVERALL DIMENSIONS:
Length: 68"(1727 mm)
Width: 20"(508 mm)
Height: 54"(1372 mm)
WEIGHT: 300 lbs.(136 kg)
WARRANTY
Two-year limited warranty on machines, parts, and accessories.
