The DeWalt DW570K 1-1/8-inch hammer kit features an 8.3 amp motor that provides high performance and overload protection. In addition, the unit's hard-hitting hammer mechanism provides fast and efficient penetration, and its fully sealed gearbox is engineered for long life by keeping grease in and dust out. The DW570K accepts SDS bits from 5/32 to 1-1/8 inch. It features a higher drilling capacity than compact drilling hammers, resulting in increased productivity in 1/2-inch and larger applications. Because it weighs less than large drilling hammers, user fatigue is reduced in 5/8-inch and smaller applications. Chipping (hammer-only) mode allows the user to perform light chipping applications. There's also a rotation-only mode for wood and metal drilling (using SDS-to-round shank adapter). Dual-wall housing construction with rubber mounts in between isolates the vibration within the inner housing. This reduces user-felt vibration, causing less fatigue. In addition, the variable speeds allow for precise hole placement. Multiple O-rings and dust seals prevent dust from entering the tool for extended hammer mechanism life. The factory-set clutch reduces sudden, high-torque reactions if the bit jams. Includes 360-degree side handle, removable/replaceable chuck, and carrying case. Features
- 8.3 amp motor provides high performance and overload protection
- Hard-hitting hammer mechanism for fast and efficient penetration
- Fully sealed gearbox engineered for long life by keeping grease in and dust out
- Accepts SDS bits from 5/32 to 1-1/8 inch
- Higher drilling capacity than compact drilling hammers for increased productivity in 1/2-inch and larger applications
- Weighs less than large drilling hammers, reducing user fatigue in 5/8-inch and smaller applications
- Chipping (hammer only) mode allows user to perform light chipping applications
- Rotation-only mode for wood and metal drilling (using SDS-to-round shank adapter)
- Dual-wall housing construction with rubber mounts in between isolates vibration to inner housing, reducing user-felt vibration and causing less fatigue
- Variable speed allows for precise hole placement
- Multiple O-rings and dust seals prevent dust from entering the tool for extended hammer mechanism life
- Factory-set clutch reduces sudden, high-torque reactions if bit jams
- 360-degree side handle is easily adjustable for user preference or use in tight spaces
- Removable/replaceable chuck allows quick installation of 1/2-inch round shank chuck and permits easier service
- Modular design provides easy access to switch, cord set, brushes, motor, and gear case for ease of service
- Switch and brushes designed for long life in dusty, contaminated environments
Specifications
- Amps: 8.3 amps
- Switch: variable speed
- Concrete drilling: 1-1/8 inches
- Chipping: yes
- Wood/steel drilling: 1.5 / 5 inches
- No-load speed: 0 to 730 rpm
- Blows per minute: 0 to 4,100 bpm
- Impact energy: 3.34 ft./lbs.
- Clutch: yes
- Tool length: 15.25 inches
- Tool weight: 10.75 lbs.
Includes
- 360-degree side handle
- Depth rod
- Heavy-duty kit box
Warranty
This DeWalt high-performance industrial tool comes with a warranty package that includes:
30-day, no-risk satisfaction guarantee
One-year free service contract
One-year warranty
