This wood-turning lathe features a 1/2-inch thick, cast-iron headstock, with a positive cam action locking device located at the rear of the head for easy locking and unlocking, and is designed to travel the entire length of the lathe bed. The tailstock is a one-piece 1/2-inch-thick casting with 1-3/8-inch-diameter quill, no. 2 Morse taper, and over 4 inches of travel. The inverter controls the torque of the lathe and allows turning at a very low rpm without stalling. The distance between centers is 34-1/2 inches. The 2-horsepower, three-phase motor, with one phase inverter, operates at speed ranges of 0 to 1,200 and 0 to 3,200 rpm. FEATURES
- Supported by 1/2" thick cast iron heavy-duty legs
- Legs feature 2" diameter adjustable feet
- Precision ground bed ways
- 2-Step, 10 Groove Poly-V Belt Drive
- Headstock and tailstock are 1/2" thick cast iron
- Headstock and tailstock have positive cam action locking devices
- Headstock is adjustable (transforms the lathe from a long bed lathe to a short bed lathe with ease)
- Tailstock clamp is circular for easy adjustment and has a deep pocket especially for storage of small tools while turning
- Tool rest has been designed with a finger guide which allows for more control
- Forward/Reverse rotation
STANDARD EQUIPMENT
- Motor
- Safety shield
- 3" face plate & face plate wrench
- 14" tool rest
- Spur & live (ball bearing) centers
- Knockout rod
- Spindle lock
SPECIFICATIONS
Stock Number: 1352000
Model: 3520A
Capacities:
Swing Over Bed (in): 20
Swing Over Tool Rest Base (in): 16
Working Dist Between Centers (in): 34-1/2
Speeds (RPM): 2 0-1200 & 0-3200
Spindle:
Nose (in x TPI): 1-1/4 x 8
Hole (completely through spindle/in): 9/16
Headstock Taper: MT-2
Tailstock Taper: MT-2
Ram Travel (in): 4
Centerline of Spindle to Floor (in): 44 (adjustable)
Overall Dimensions (HxWxL/in): 58 x 27 x 54
Motor (TEFC): 2 HP w/Inverter, 3 Ph, 230V
Shipping Weight (lbs): 717
