Most helpful customer reviews
4 of 4 people found the following review helpful.
Great for ESD/Shielding
By Brendan M Oliver
For what you pay, this stuff works surprisingly well. I used it in modding a proprietary header to include an S-Video signal, which is notorious for signal bleeding due to improper shielding. A little bit of this stuff and it completely solved the problem. I removed one star because the adhesive is a little iffy (don't apply too much wear when applying it to purely metal surfaces, enough friction will cause this stuff to slide off) and because it is really difficult to find out where the tape left off on this material but these are both minor issues.
5 of 5 people found the following review helpful.
I do not recommend this product for auto wire harness work
By Ken R.
This is not correct Automotive wire harness tape as it has adhesive on it which will turn your wires slimy over time. Correct wire harness tape is vinyl but does not have an adhesive backing , the vinyl stretches and stick to itself without the glue. I do not recommend this product for auto wire harness work.
11 of 14 people found the following review helpful. See all 100 customer reviews...
Not UL rated electrical tape
The roll they sent me was not UL-rated tape. It was not rated for use with electrical components (e.g. insulation). It was not "electrical tape," and it seemed flimsier than real electrical tape.
On the other hand, because it is not very sticky and can be easily torn into lengths by hand, I've been able to put it to good use as a removable tape on non-paper surfaces.
Update: I think that they updated the product description on Amazon so it's clearer that it is wire harness tape and not electrical tape, so I'm bumping it up a star.