Need to drill a square hole? Then try this bench top hollow chisel mortiser with included chisel and bit sets. Designed specifically for drilling mortises, the drill bit and hollow chisel combination on this machine drills a hole and squares the corners in one easy operation. It even comes with a set of four chisels and bits to get you started! The 1/2-horsepower induction motor runs quietly and smoothly for precision results. The rack and pinion head raising mechanism and the long, multi-position lever handle make it easy to plunge the bit into the workpiece. An adjustable hold down and fence stabilize material during drilling. Cast iron construction and adjustable dovetailed guides ensure durability and life-long accuracy. Includes 1/4-, 5/16-, 3/8-, and 1/2-inch chisel and bits. WHAT'S IN THE BOX
Delta Industrial Model MM300 Hollow Chisel Mortiser with a 1/2HP, 120V motor; 3/8" capacity chuck with key, base and table, control handle, head stabilizer, fence and holddown, four mortising chisels and bits, tool and chisel holder and instruction manual.
DELTA DIFFERENCE
- Induction TEFC motor for long-lasting, trouble-free operation.
- Heavy, cast-iron steel and construction for rigidty and stability.
- Standard 3-jaw key chuck for positive gripping of mortising bits.
- Adjustable depth stop for accurate depth measurements and repetitive mortising.
- Geared rack and pinion head raising/loweringfor positive feed control.
- Mortising head operates on dovetail ways easily adjusted to compensate for wear.
- Fully adjustable fence/hold-down assembly accommodates varius size work. Hold-down prevents workpiece from cisel is withdrawn.
- Extra-long, multi-position feed lever for better leverage and easier operation with less operator fatigue.
- Handy tool and chiselholder keeps chuck key, wrench, chisels and bits within easy operator reach.
SPECIFICATIONS
MOTOR: 1/2 HP, 1725rpm
HEAD TRAVEL: 4 3/4"
BASE SIZE: 7" x 11-1/8"
CAPACITIES:
Key chuck: 0 to 3/8"(0 to 10 mm)
Chuck to table: 7" max.(178 mm)
Chisel Sizes: 1/4" X 1/4", 5/16" X 5/16", 3/8" X 3/8", 1/2" X 1/2"
Chuck to base: 10" max.(254 mm)
Max. stroke: 4 3/4"(121 mm)
FENCE SIZE: 1 3/4" X 13 3/4"(45 X 349 mm)
BASE SIZE: 7" x 11-1/8"
OVERALL DIMENSIONS:
Height: 31 1/2"(800 mm)
Width: 14"(356 mm)
Depth: 13 1/3"(343 mm)
WEIGHT: 47 lbs.(21 kg)
WARRANTY
Two-year limited warranty on machines, parts, and accessories.
