If an 8-inch drill press is too small for your projects, but a 12-inch model is too expensive for your budget, try this 10-inch drill press. It has five speeds from 620 to 3,100 rpm and a heavy-duty 1/4 hp induction motor for smooth power and long lasting durability. The cast iron table tilts up to 45 degrees for angled drilling and has a rack and pinion raising mechanism for easy adjustments. Slots in the table allow mounting vises, clamps, auxiliary tables, and other accessories. The chuck accepts bits with up to 1/2-inch shanks, allowing the use of larger wood boring bits. A 2-1/4-inch stroke length allows the drilling of deeper holes without having to re-position the work piece. The on/off switch is also removable to prevent unauthorized use. WHAT'S IN THE BOX
Delta ShopMaster Model DP200 10" Bench Drill Press with a 1/4HP, 120V motor; tilting table, table raising mechanism, 1/2" capacity chuck and key, belt and pulleys, light, and instruction manual.
DELTA DIFFERENCE
- Induction motor for long-lasting, smooth performance.
- Pivoting motor mount maintains correct belt tension and facilitates speed changes.
- Three-spoke pilot wheel for operator convenience.
- Adjustable-position, locking depth stop for accurate depth measurement and repetitive drilling.
- Tilting table with slots for fast clamping of work.
- Standard 3-jaw, 1/2" capacity chuck for positive gripping of various drill press cutting tools.
SPECIFICATIONS
SPEED RANGE: 620-3100
SPINDLE AND CHUCK TAPER: Jacobs 33
QUILL:
Diameter: 1 1/2"(38 mm)
Stroke: 2 1/4"(57 mm)
CAPACITIES:
Chuck: 1/2"(13 mm)
Chuck to table: 14 1/8"(359 mm)
Chuck to base: 19"(483 mm)
Max. dia. hole in steel: 3/8"(10 mm)
Max. dia. hole in cast-iron: 1/2"(13 mm)
OVERALL DIMENSIONS: 30"H X 11"W X 24"D (762 X 279 X 610 mm)
WEIGHT: 70 lbs.(32 kg)
QUILL TRAVEL: 2 3/8"
STEP PULLEY OR VARIABLE SPEED: Step Pulley
MOTOR: 1/4HP, 120V, single phase, 60 Hz., 1720 rpm
MOTOR CONTROL: Toggle switch with lock out key
SPINDLE SPEEDS: 5: 620, 1100, 1720, 2340, 3100 rpm
TABLE:
Tilting with C-clamp edge and diagonal slots
8 1/4" X 7 1/2"(210 X 191 mm)
BASE: 8 1/4" X 7 1/2"(210 X 191 mm)
COLUMN DIAMETER: 2 3/8"(60 mm)
WARRANTY
Two-year limited warranty on machines, parts, and accessories.
