Removes imperfections from the edges and faces of stock to make it straight and true. Designed for the home workshop, the new Delta variable speed jointer offers performance features and capabilities even a professional woodworker can appreciate. Variable 6,000-11,000 rpm speed ranges with handy speed selection chart that allows you to select the right speed for the application. The easily adjustable, center-mounted fence allows quick set up, even for angled jointing up to 45 degrees. A ball-bearing cutterhead with jackscrew blade adjustment provides smooth operation and easy blade changes. A built-in cutterhead lock also aides in blade changes, preventing the cutterhead from turning. The conveniently located infeed table raising and lowering knob and an easy-to-read scale make adjustments easy. WHAT'S IN THE BOX
Delta Industrial Model JT160 6" Variable Speed Bench Jointer with a 10 amp., 120V motor; 2-knife cutterhead, cutterhead guard, push blocks, wrenches and instruction manual.
DELTA DIFFERENCE
- Variable 6,000 to 11,000 rpm speed range allows you to select the right speed for the size and hardness of the material you're cutting.
- Center-mounted fence gives needed support throughout the cut for accurate edge jointing.
- Fence tilts 0° to 45° outward for bevel jointing & chamfering; features positive stops at 45° & 90°.
- Poly-V belt drive for maximum transmission of power to cutterhead with minimum belt slippage.
- Balanced cutterhead for smooth operation and maintenance-free life.
- Two-knife cutterhead with jack-screw knife leveling arrangement for easy replacement and adjustment of individual knives.
- Built-in cutterhead lock facilitates knife replacement and adjustment.
- Convenient, infeed table raising/lowering control with dual English/Metric scale facilitates depth of cut adjustment; lock knob securely holds desired setting.
- Built-in chip chute directs dust and chips away from operator, motor and electricals.
- Rubber base pads minimize operating vibratoin and dampen noise level.
- Extra-large table provides ample work support for surfacing stock up to a full 6" wide.
SPECIFICATIONS
MOTOR: 10 amp
WEIGHT: 35 lbs.(16 kg)
CUTTING CAPACITY:
Max. Width: 6 1/8"(156 mm)
Max. Depth: 1/8"(3 mm)
Cuts per Minute: 12,000-22,000
CUTTERHEAD: Number of knives: 2
VARIABLE SPEED: 6,000 to 11,000 rpm; 12,000 to 22,000 cuts per min
TABLE: Size: 6 3/16" X 30"(157 X 762 mm)
FENCE: Size: 4 1/4" X 19 3/4"(108 X 502 mm)
TILT: 45° out
POSITIVE STOPS: 90° and 45°
OVERALL DIMENSIONS:
Height: 13 1/2"(343 mm)
Length: 30"(762 mm)
Width: 18"(457 mm)
WARRANTY
Two-year limited warranty on machines, parts, and accessories.
