Sand a variety of projects with this six-inch belt and nine-inch disc sander. Powered by a one-horsepower induction motor, this sander runs smoothly and has plenty of power for woodworking needs. The belt unit can be positioned horizontally for edge or face sanding or vertically for contour work or use with the tilting table. The tilting table installs in one of two positions for use with either the belt or disc units. The table tilts up to 45 degrees and has a slot for use with a miter gauge (sold separately) for angled work. A single dust port can be used for dust collection from either the disc or the belt and fits a standard 2-1/4-inch shop vacuum hose. Belt changes are simple with the tensioning lever and belt tracking control knob. WHAT'S IN THE BOX
Delta Industrial Model 31-695 6" Belt/9" Disc Sander with a 1HP, 120V induction motor; 80-grit abrasive belt, 80-grit abrasive disc, stand, tilting table, back-stop, T-handle wrench and instruction manual. For wood only.
DELTA DIFFERENCE
- Powerful, 1HP, induction motor is totally enclosed for protection against damaging dust.
- Adjustable belt unit operates vertically, horizontally or at any angle in-between. Belt guard removes easily for contour sanding.
- Cast-aluminum table with miter gage slot tilts 45° for bevel sanding and may be used on either the belt or disc unit.
- Die-cast aluminum base minimizes operating vibration.
- Abrasive belt rotates on steel platen with smooth replaceable graphite pad for extra-smooth belt rotation and longer belt life.
- Belt tracking knob offers operator the convenience of "tool-free" belt alignment.
- Built-in, 2 1/4" diameter dust outlet for hook-up to dust collection system.
- Sturdy steel stand with foot pads for greater operating stability and less operating vibration.
- Power take-off spindle lets you add on accessory flex shaft for handling a variety of other finishing jobs.
- Belt tensioning lever loosens and tightens belt instantly for quick belt changes.
- Large, 9" diameter abrasive disc is perfect for sanding large curves or rounding out sharp corners.
SPECIFICATIONS
MOTOR: 1 HP
SPEED:
Belt: 2200 SFPM (671 SMPM)
Disc: 2800 rpm
ABRASIVE BELT:
Length: 48"(1219 mm)
Width: 6"(152 mm)
DISC DIAMETER: 9"
TABLE SIZE AND TILT:
Belt: 6" X 9"(152 X 229 mm) Tilts 45° up and down
Disc: 13" X 16"(330 X 406 mm) Tilts 45° up and down
OVERALL DIMENSIONS (Belt in Vertical Position):
Depth: 21"(533 mm)
Length: 31"(787 mm)
Height: 58"(1473 mm)
OVERALL DIMENSIONS (Belt in Horizontal Position):
Depth: 21"(533 mm)
Length: 31"(787 mm)
WEIGHT: 79 lbs.(36 kg)
WARRANTY
Two-year limited warranty on machines, parts, and accessories.
